 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN7130 MCH3206 NPN Silicon Epitaxial Planar Transistor MCH3206 DC / DC Converter Applications Applications * Package Dimensions unit : mm 2194A [MCH3206] 0.25 Relay drivers, lamp drivers, motor drivers, strobes. Features * * * * * * Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High speed switching. Ultrasmall package facilitates miniaturization in end products (0.85mm). High allowable power dissipation. 0.3 3 0.15 2.1 1.6 0.25 0.65 2.0 (Bottom view) 0.07 2 1 3 1 : Base 2 : Emitter 3 : Collector Specifications Absolute Maximum Ratings at Ta=25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board(600mm2!0.8mm) Conditions 0.85 1 2 (Top view) SANYO : MCPH3 Unit 15 15 5 3 5 600 0.8 150 --55 to +150 V V V A A mA W C C Ratings Electrical Characteristics at Ta=25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=12V, IE=0 VEB=4V, IC=0 VCE=2V, IC=500mA VCE=2V, IC=500mA VCB=10V, f=1MHz Ratings min typ max 0.1 0.1 200 380 13 560 MHz pF Unit A A Marking : CF Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N3001 TS IM TA-3369 No.7130-1/4 MCH3206 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat)1 VCE(sat)2 VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=1.5A, IB=30mA IC=3A, IB=60mA IC=1.5A, IB=30mA IC=10A, IE=0 IC=1mA, RBE= IE=10A, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. 15 15 5 30 210 11 Ratings min typ 100 180 0.85 max 150 270 1.2 Unit mV mV V V V V ns ns ns Switching Time Test Circuit PW=20s DC1% INPUT IB1 OUTPUT IB2 VR 50 + 220F VBE= --5V + 470F VCC=5V 1k RL IC=20IB1= --20IB2=1.5A 5 IC -- VCE mA 60 5 IC -- VCE A 40m 40m A 25mA Collector Current, IC -- A 4 25mA 20mA Collector Current, IC -- A 4 20mA 15mA 3 3 15mA 10mA 10mA 2 2 5mA 1 5mA 1 IB=0 1mA 0 0 0.2 0.4 0.6 0.8 2mA 0 1.0 IT03982 1000 0 2 4 6 IB=0 1mA 8 2mA 10 IT03983 Collector-to-Emitter Voltage, VCE -- V 6.0 5.5 5.0 IC -- VBE Collector-to-Emitter Voltage, VCE -- V hFE -- IC VCE=2V VCE=2V 7 Collector Current, IC -- A DC Current Gain, hFE 4.5 4.0 3.5 3.0 5 Ta=75C 25C --25C 3 2.0 1.5 1.0 0.5 0 0 0.2 0.4 0.6 Ta=75 C 25C --25C 2.5 2 0.8 1.0 IT03984 100 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Base-to-Emitter Voltage, VBE -- V Collector Current, IC -- A 5 7 10 IT03985 No.7130-2/4 MCH3206 5 VCE(sat) -- IC IC / IB=20 5 VCE(sat) -- IC IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 3 3 2 100 7 5 3 2 100 7 5 3 2 = Ta 7 C 5 --2 C 5 25 C C 75 a= C T 5 --2 25 C 10 7 5 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT03986 10 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT03987 Collector Current, IC -- A 10 7 VBE(sat) -- IC Collector Current, IC -- A 100 Cob -- VCB IC / IB=50 f=1MHz Base-to-Emitter Saturation Voltage, VBE(sat) -- V 3 2 Output Capacitance, Cob -- pF 2 3 5 7 10 IT03988 5 7 5 1.0 7 5 3 2 Ta= --25C 3 75C 25C 2 0.1 0.01 2 3 5 7 0.1 2 3 5 7 1.0 10 1.0 2 3 5 7 10 2 3 5 IT03989 Collector Current, IC -- A 1000 f T -- IC Collector-to-Base Voltage, VCB -- V 10 7 5 ASO VCE=2V Gain-Bandwidth Product, f T -- MHz 7 5 Collector Current, IC -- A 3 2 1.0 7 5 3 2 0.1 7 5 3 2 ICP=5A IC=3A 100s 50 s 0 1m DC 10 op era s 10m 0m s 3 2 s tio n 100 7 5 3 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 0.01 0.1 Ta=25C Single pulse Mounted on a ceramic board (600mm2!0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 3 Collector Current, IC -- A 1.0 IT03990 PC -- Ta Collector-to-Emitter Voltage, VCE -- V IT03991 Collector Dissipation, PC -- W 0.8 M ou ed nt on 0.6 ac a er m ic a bo 0.4 rd 00 (6 m m 2! 0.2 8 0. m m ) 0 0 50 100 150 200 IT03992 Ambient Temperature, Ta -- C No.7130-3/4 MCH3206 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of November, 2001. Specifications and information herein are subject to change without notice. PS No.7130-4/4 |
Price & Availability of MCH3206
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |